Autowatch Ghost 2
Autowatch Ghost 2, a revolutionary immobiliser that protects against key-long theft, cloning and relay theft. It is a discrete device which works in silence. A unique PIN code must be entered through the buttons on the steering wheel as well as the centre console.
It is totally undetectable by thieves using diagnostic tools because it emits radio signals. It is also convenient as it doesn't require a tracker, or any additional fobs.
Cost of installation
A ghost immobiliser or ghost alarm, is a discrete device that is integrated into the CAN data network of a car. It does not require additional LED indicators or fobs. It is virtually invisible to thieves, and is based on a different basis from regular car alarms. It prevents the engine from starting unless a specific sequence of buttons are triggered by the owner of the vehicle. This makes sure that only the right person is allowed to drive the vehicle and decreases the risk of your joy and pride being stolen.
Ghost immobilisers are less expensive than traditional devices and can be put in place by qualified technicians in a matter of hours. They can also be transferred between vehicles, making them an affordable option to increase your car's security. You can use a ghost-immobiliser in conjunction with an electronic tracking system to provide an additional layer of security for your car.
Modern cars are easy targets for thieves with sophisticated tools to clone the key remote, unlock the car and then steal it. It is important to protect your vehicle with a ghost-immobiliser. It will stop the vehicle from moving until you press a unique sequence of buttons, providing you with peace of mind when handing your car over to valet parking or hiring a driver.
The Autowatch Ghost 2 immobiliser is a cutting edge car protection system that protects against modern theft methods like key copying. The small device connects to the CAN system in your vehicle and disables the engine after you enter a PIN code. This is a discrete and hidden device which is not affected by device spoofing or signal jamming. It can also send alerts to your phone if anyone tries to tamper your vehicle.
The Autowatch Ghost 2 is available for PS499 (including VAT) and can be installed in a couple of hours by our highly-skilled TASSA (Autowatch), DBS-certified security-checked installers. It is a high-tech and low-maintenance device that can be easily transferred from vehicle to vehicle and is compatible with the majority of CAN-bus systems.
Cost of replacing keys
The Autowatch Ghost offers advanced protection against key-cloning hacking and theft. It's designed to work without the requirement for additional key fobs or LED indications and it works with all modern vehicles. It can be installed in the majority of vans and cars within a couple of hours by our skilled technicians. The system can also be integrated with car trackers to make it more secure.
The system is linked to your vehicles CAN data network, making it unnoticeable to thieves. It will not cause any diagnostic lights to illuminate, because there are no radio signals. The criminal will also not be able access the OBD port on your vehicle since it is linked directly to the ECU (Engine Control Unit). This will prevent them from acquiring new key fobs or replacing the ECU that would normally allow them to start the engine.
The ghost immobiliser also completely sealed and concealed within the harness of the vehicle. This makes it almost impossible for thieves find. The system generates a unique PIN by pressing buttons on the steering wheel or dash. It must be entered to start the vehicle. Monty's also has a Service/Valet mode, which allows the vehicle to start without the PIN code. This is beneficial if you're handing over your vehicle to a mechanic, or valet parking service.
If the PIN code sequence isn't entered then the CAN Ghost will stop the vehicle from moving, or stop the engine and gear box according to your specific vehicle needs. It can be connected to a vehicle tracker so you can see the position of your vehicle on a map with any gadget that can be connected to the internet.
The system is simple to install, and can be moved between vehicles. This makes it a great option for classics and sports automobiles. It does not require batteries or power cables because it is wired into the CAN data network of your vehicle. It is almost unnoticeable and can be installed within a few hours by our TASSA-registered, DBS-security checked and certified technicians.
Cost of replacement vehicle
Autowatch Ghost immobiliser is a cutting-edge technology that provides the most advanced protection against key cloning and hacking. It works by integrating directly with the vehicle's ECU creating a wall that is virtually impossible to breach without the correct PIN code. The system is also TASSA-verified and insurance-approved, which makes it an excellent option for those looking to improve the security of their car. It also can save you money on car insurance, since most insurance companies offer discounts for cars equipped with this system.
The Ghost system is inaccessible to thieves, and it operates without radio signals. It connects with the CAN network of your vehicle and requires a unique PIN in order to start your vehicle. It also prevents hackers from accessing the system via diagnostic scans or altering the OBD port of your car. The device also employs a unique algorithm that identifies and disables cloned keys.
While it is possible to install the Ghost immobiliser on your own, the procedure is risky and should only be completed by a trained professional. Incorrect installation could cause damage to your car's wiring and render the device useless. In addition the DIY installation could cause warranty issues for the device and your vehicle.
The majority of Ghost users report high levels of satisfaction with the device. They appreciate the security and peace of mind security it brings. It is also simple to use and discreet in appearance. The majority of users are pleased with the fact that it can protect their vehicle from theft even if they lose their keys.
Some customers have reported issues with the device's stop/start feature. This could be due an incorrect configuration or a problem independent of the Ghost immobiliser. However, these problems are very rare and can be solved by contacting the firm that installed the Ghost.
A professional Ghost installation is recommended since the device could be expensive to repair or replace if damaged by an experienced hacker. To avoid this, you must make sure that the installer has a solid track record and is a certified. A reputable installer will be dedicated to ensuring customer satisfaction, and will be able to stand behind the quality of their work.
Costs for insurance
A ghost immobiliser is an anti-theft device that stops thieves from starting your vehicle. It connects to the car's CAN data network and creating an unique PIN code sequence which must be entered prior to the engine starts. It can be easily moved between vehicles, and it does not require power cables or batteries. It also works with a variety of car alarms. So it can be used as a stand-alone security measure or as a complement to a traditional alarm system. It is also programmed to work on an entirely new vehicle if you plan to trade or sell your car in the near future.
The autowatch ghost is an immobiliser that can be easily installed and is not visible to thieves. It makes use of the buttons on your car to input your PIN code. This makes it difficult for thieves find its presence. It is also highly durable and weatherproof, so it is able to endure any kind of weather. car immobiliser ghost is ideal for classics, sports cars and high-end vehicles that require battery isolation while being parked for long periods of time.
This technology is able to prevent the cloning and cloning signals and bypassing door locks by directly connecting to CAN. It is a TASSA-certified immobiliser, which is regarded by insurance providers as a theft deterrent. It also comes with one of a kind feature, Stealth Active. This is undetectable by key devices for cloning.
In contrast to other immobilisers for cars, the Autowatch ghost is a low-maintenance device which requires no wiring, so it doesn't interfere with your vehicle's electrical system or its aesthetics. Installation is easy and can be completed by a technician. It is important to remember however that the device could be damaged if it is installed improperly. This is the reason it's advisable to work with an experienced installer to ensure that your vehicle is safe.
While many opt to install a ghost immobiliser themselves however, it's essential to seek professional help if you're considering this option. Doing it yourself could lead to a myriad of problems, such as connecting the wrong wires and causing electrical malfunctions. Furthermore, improperly placed wires can make the device useless or accessible to thieves. It is therefore a good idea for you to incorporate an immobiliser with other security measures for instance, GPS monitoring or alarm systems. This will give you the best chance to get a reduced insurance premium.